Guide to Hacking - История изменений

>La Villa Strangiato: fixes liqin's name, fixes chin-hae's name

2023-10-16T22:01:23Z

fixes liqin's name, fixes chin-hae's name

← Предыдущая версия		Версия от 01:01, 17 октября 2023
Строка 113:		Строка 113:
	Fire alarms on getting pulsed will not detect or activate the fire doors in the case of a fire or a breach. If it is cut, the wires are removed and the alarm is turned off completely.		Fire alarms on getting pulsed will not detect or activate the fire doors in the case of a fire or a breach. If it is cut, the wires are removed and the alarm is turned off completely.

	=== [[File:~~Walkietalkie~~.png]] Station-Bounced Radios & [[File:RemoteSignalingDevice.png]] Signalers ===		=== [[File:Station_Bounced_Radio.png]] Station-Bounced Radios & [[File:RemoteSignalingDevice.png]] Signalers ===
	Station-Bounced Radios are used primarily for times where the headset radio does not work, such as when you are off the vessel where Telecomms cannot reach your headset or if Telecomms is not active.		Station-Bounced Radios are used primarily for times where the headset radio does not work, such as when you are off the vessel where Telecomms cannot reach your headset or if Telecomms is not active.
	Signalers are used to send out a signal, or pulse in the case of hackable devices. Signalers, Station-Bounced Radios, Tracking Beacons, and Intercoms all follow the following wire scheme. Please note that one of three wires is missing as it is practically useless.		Signalers are used to send out a signal, or pulse in the case of hackable devices. Signalers, Station-Bounced Radios, Tracking Beacons, and Intercoms all follow the following wire scheme. Please note that one of three wires is missing as it is practically useless.

>La Villa Strangiato в 08:15, 15 октября 2023

2023-10-15T08:15:43Z

← Предыдущая версия		Версия от 11:15, 15 октября 2023
Строка 125:		Строка 125:
	#The memory is now reset. Punch in your favorite code and hit E to set it.		#The memory is now reset. Punch in your favorite code and hit E to set it.
	#Screwdriver the panel shut.		#Screwdriver the panel shut.



	{{Engineering}}		{{Engineering}}
	{{~~Gameplay~~ Guides}}		{{Guides}}
	[[Category:Guides]]		[[Category:Guides]]

>La Villa Strangiato: teslus deletus

2023-10-14T23:32:09Z

teslus deletus

← Предыдущая версия		Версия от 02:32, 15 октября 2023
Строка 64:		Строка 64:

	You can find a guide to deconstruct cameras [[Guide_to_Construction#Security_Camera\|here]].		You can find a guide to deconstruct cameras [[Guide_to_Construction#Security_Camera\|here]].

	~~== [[File:PA_console.gif]] Particle Accelerator ==~~
	Used to start the [[Tesla Reactor]] via accelerated particles. The accelerator is limited to a strength level of 2 by default, however to start the Tesla faster, and increase its power output faster, it can be hacked to unlimit its power. Keep in mind, the PA must be set up before the computer can be hacked. For a guide to set up the PA, look here: [[Tesla Reactor#Particle Accelerator]].

	* The '''toggle wire''' will toggle the PA on or off when pulsed, if cut it will disable the PA and stop it from turning on.
	* The '''strength wire''' will increase the strength of the PA when pulsed, if cut it will toggle the strength to 0 and stop people turning it up.
	* The '''limit power wire''' will allow the PA to be turned up to strength 3 when cut. When pulsed it will beep.
	* The '''nothing wire''' will do nothing, it's just here to make life harder.
	~~'''IMPORTANT:''' Don't forget to scan the parts again.~~

	== [[File:merc_nuke_idle.png]] Mercenary Nuclear Bomb ==		== [[File:merc_nuke_idle.png]] Mercenary Nuclear Bomb ==

>William Murdoch: Updated the guide with current information, sprites, and reformatting. Only robot wires have been added.

2023-02-05T18:12:56Z

Updated the guide with current information, sprites, and reformatting. Only robot wires have been added.

Внесённые изменения

>William Murdoch: Updating sprites to remove duplicates. Larger guide update later.

2023-02-05T03:10:19Z

Updating sprites to remove duplicates. Larger guide update later.

>William Murdoch: Updating sprites

2023-01-25T21:46:54Z

Updating sprites

>Abigail886: Category update

2023-01-23T08:55:40Z

Category update

← Предыдущая версия		Версия от 11:55, 23 января 2023
Строка 226:		Строка 226:
	{{Engineering}}		{{Engineering}}
	{{Gameplay Guides}}		{{Gameplay Guides}}
	[[Category:Guides~~\|Hacking, Guide to~~]]		[[Category:Guides]]

>Amunak: /* Airlocks */ - updates hacking info with latest changes

2020-12-03T19:51:44Z

Airlocks: - updates hacking info with latest changes

← Предыдущая версия		Версия от 22:51, 3 декабря 2020
Строка 11:		Строка 11:

	== [[File:Airlock.png]] [[File:Airlock external.png]] Airlocks ==		== [[File:Airlock.png]] [[File:Airlock external.png]] Airlocks ==
	Both internal and external access airlocks are hackable, though [[File:Hazard_Door.png]] hazard doors are not hackable. Wires are randomized at the start of each round, but are standardized throughout the station (e.g., every orange wire might toggle the bolts). ~~This~~ is probably where you'll be doing the most of your hacking. Remember, cutting power to the door will stop everything else from working.		[[File:airlock-hacking.png\|right\|thumb\|Typical airlock hacking UI.]]
			Both internal and external access airlocks are hackable, though [[File:Hazard_Door.png]] hazard doors are not hackable. Wires are randomized at the start of each round, but are standardized throughout the station (e.g., every orange wire might toggle the bolts). However, high security airlocks are always randomized and have extra decoy wires to make hacking harder.

			The hacking menu shows current status of the airlock and you can tell much about it from there. It is probably where you'll be doing the most of your hacking. Remember, cutting power to the door will stop everything else from working.

	=== [[File:Multitool.png]] With a Multitool ===		=== [[File:Multitool.png]] With a Multitool ===
Строка 59:		Строка 62:
	=== Wire Functions ===		=== Wire Functions ===
	* '''ID wire''': ''Pulsing'' will flash the 'access denied' red light; ''cutting'' will prevent anyone from opening the door if it's a restricted door; otherwise, it does nothing.		* '''ID wire''': ''Pulsing'' will flash the 'access denied' red light; ''cutting'' will prevent anyone from opening the door if it's a restricted door; otherwise, it does nothing.
	* '''AI control wire''': ''Pulsing'' will ~~flash~~ the 'AI control light' ~~off~~ and ~~on quickly;~~ ''~~cutting~~'' will prevent the AI from accessing the door unless ~~s/he hacks~~ the power wires		* '''AI control wire''' (AI control allowed): Unlike most other wires, this one has more than just two states. ''Pulsing'' will toggle the 'AI control light' between 'Orange' (limited AI control - they are not allowed to bolt/unbolt the airlock) and 'Green' (they have full control). ''Cutting'' shows the control as 'Red' and will prevent the AI from accessing the door unless they hack the power wires (which takes considerable time).
	* '''Main power wires (2)''' (~~Test~~ light wires): ''Pulsing'' will turn off the 'test light' and kill the power for a short time; ''cutting'' will kill the power for a time before backup power kicks in. There are two of these, and both are needed for the main power to work. Cutting will cause sparks.		* '''Main power wires (2)''' (test light wires): ''Pulsing'' will turn off the 'test light' and kill the power for a short time; ''cutting'' will kill the power for a time before backup power kicks in. There are two of these, and both are needed for the main power to work. Cutting will cause sparks.
	* '''Backup power wire (2)''': ''Pulsing'' will turn off the 'test light' kill the power for a short time if the main power is out, otherwise, nothing. ''Cutting'' will obviously disable the backup power. There are two of these, and both are needed for backup power to work. Cutting will cause sparks.		* '''Backup power wire (2)''': ''Pulsing'' will turn off the 'test light' kill the power for a short time if the main power is out, otherwise, nothing. ''Cutting'' will obviously disable the backup power. There are two of these, and both are needed for backup power to work. Cutting will cause sparks.
	* '''Bolt control wire''': ''Pulsing'' will toggle the bolts; ''~~cutting~~'' will drop the bolts.		* '''Bolt control wire''': ''Pulsing'' will toggle the door bolts. ''Cutting'' will drop the bolts and they will remain dropped even when mended.
	* '''Bolt ~~light~~ wire''': ''Pulsing'' will toggle if the bolt/access lights ~~will flash or~~ turn on. ''Cutting'' will turn the lights off until mended.		* '''Bolt wire''' (door bolt indicator): ''Pulsing'' will toggle whether the bolt/access lights turn on / flash. ''Cutting'' will turn the lights off until mended. Even when the lights are off the UI will tell you that you can see the bolts are up/down.
	* '''Door control wire''': If the door is ID restricted, this is pretty much useless. If not, ''Pulsing'' will open/close the door and ''cutting'' will keep it that way, sort of like bolting.		* '''Door control wire''': If the door is ID restricted, this is pretty much useless. If not, ''Pulsing'' will open/close the door and ''cutting'' will keep it that way, sort of like bolting.
	* '''Electrifying wire''': ''Pulsing'' will electrify the door for 30 seconds; ''cutting'' will permanently electrify it until mended~~. This will cause the safety light to flash~~. You can find the wire easily because the door shoots sparks when pulsed or cut. Obviously useless if there is no power to the door.		* '''Electrifying wire''': ''Pulsing'' will electrify the door for 30 seconds; ''cutting'' will permanently electrify it until mended. You can find the wire easily because the door shoots sparks when pulsed or cut. Obviously useless if there is no power to the door.
	* '''Door safeties wire''': ''Pulsing'' will cause the check wiring light to toggle, causing the door to no longer check if someone is in the door before closing if it is on. ''Cutting'' will permanently turn off the safeties until mended		* '''Door safeties wire''': ''Pulsing'' will cause the 'check wiring' light to toggle, causing the door to no longer check if someone is in the door before closing if it is on. ''Cutting'' will permanently turn off the safeties until mended.
	* '''Door timing wire''': ''Pulsing'' will toggle the door's timer, and the check timing light. If the light is on, the door will try to close as ~~immediately~~ as it ~~can~~. ''Cutting'' it will turn off the timer until mended.		* '''Door timing wire''': ''Pulsing'' will toggle the door's timer, and the 'check timing' light. If the light is on, the door will try to close as soon as it opens. ''Cutting'' it will turn off the timer until mended.

	=== Strategies ===		=== Strategies ===

>Geeves: autolathe wires got changed

2020-06-14T19:57:05Z

autolathe wires got changed

← Предыдущая версия		Версия от 22:57, 14 июня 2020
Строка 98:		Строка 98:
	# [[File:Screwdriver tool.png]] Screwdriver the autolathe to open the maintenance panel.		# [[File:Screwdriver tool.png]] Screwdriver the autolathe to open the maintenance panel.
	# Click on the autolathe with an empty hand to access the wiring.		# Click on the autolathe with an empty hand to access the wiring.
	# There are three important wires. ~~Cutting them toggles their light permanently~~, ~~pulsing does so temporarily~~. ~~Red light is power~~, ~~green light is electrocution and blue is hacked options~~.		# There are three important wires. Power, electrocution, hacking. You probably want hacking, unless you want to zap some poor sucker.
	# Have fun accessing some new options:		# Have fun accessing some new options:
	#* Compressed matter cartridges (for the RCD)		#* Compressed matter cartridges (for the RCD)

>Chada1: Typo fix.

2019-06-07T23:29:02Z

Typo fix.

← Предыдущая версия		Версия от 02:29, 8 июня 2019
Строка 1:		Строка 1:
	{{WIP}}		{{WIP}}

	'''(This is a copy of ~~Baystaions~~ guide on Hacking, all credit goes to them)'''		'''(This is a copy of Baystations guide on Hacking, all credit goes to them)'''

	== What You'll Need ==		== What You'll Need ==

← Предыдущая версия		Версия от 06:10, 5 февраля 2023
Строка 4:		Строка 4:

	== What You'll Need ==		== What You'll Need ==
	* [[File:~~Yellowgloves~~.png]] Insulated gloves - Hackables have power lines, and cutting/pulsing these without gloves can harm you.		* [[File:Gloves_insulated.png]] Insulated gloves - Hackables have power lines, and cutting/pulsing these without gloves can harm you.
	* [[File:Screwdriver tool.png]] Screwdriver - For opening up panels and the like. A necessary tool		* [[File:Screwdriver tool.png]] Screwdriver - For opening up panels and the like. A necessary tool
	* [[File:Wirecutters.png]] Wirecutters - For cutting and mending wires. Also a necessary tool		* [[File:Wirecutters.png]] Wirecutters - For cutting and mending wires. Also a necessary tool
Строка 20:		Строка 20:
	Remember, wires are randomized, so you need to identify them the first time. The most important ones to identify are the "test light" wire and the "door bolts" wire.		Remember, wires are randomized, so you need to identify them the first time. The most important ones to identify are the "test light" wire and the "door bolts" wire.

	# Remember to equip [[File:~~Yellowgloves~~.png]] insulated gloves to prevent electric shock.		# Remember to equip [[File:gloves_insulated.png]] insulated gloves to prevent electric shock.
	# [[File:Screwdriver tool.png]] Screwdriver in hand, click on the airlock to open the panel and expose the wiring		# [[File:Screwdriver tool.png]] Screwdriver in hand, click on the airlock to open the panel and expose the wiring
	# With a [[File:Multitool.gif]] multitool, click on the airlock to access the wiring.		# With a [[File:Multitool.gif]] multitool, click on the airlock to access the wiring.
Строка 35:		Строка 35:
	==== Finding the Right Wires ====		==== Finding the Right Wires ====
	Make sure you choose a door that you and everyone else won't mind you breaking, because in most cases this will prevent the door from opening again until it's repaired by an Engineer.		Make sure you choose a door that you and everyone else won't mind you breaking, because in most cases this will prevent the door from opening again until it's repaired by an Engineer.
	# Remember to equip [[File:~~Yellowgloves~~.png]] insulated gloves to prevent electric shock.		# Remember to equip [[File:gloves_insulated.png]] insulated gloves to prevent electric shock.
	# [[File:Screwdriver tool.png]] Screwdriver in hand, click on the airlock to open the panel and expose the wiring		# [[File:Screwdriver tool.png]] Screwdriver in hand, click on the airlock to open the panel and expose the wiring
	# Equip [[File:Wirecutters.png]] wirecutters.		# Equip [[File:Wirecutters.png]] wirecutters.

← Предыдущая версия		Версия от 00:46, 26 января 2023
Строка 7:		Строка 7:
	* [[File:Screwdriver tool.png]] Screwdriver - For opening up panels and the like. A necessary tool		* [[File:Screwdriver tool.png]] Screwdriver - For opening up panels and the like. A necessary tool
	* [[File:Wirecutters.png]] Wirecutters - For cutting and mending wires. Also a necessary tool		* [[File:Wirecutters.png]] Wirecutters - For cutting and mending wires. Also a necessary tool
	* [[File:Multitool.~~png~~]] Multitool - For pulsing wires; not necessary for most hacking, but makes life a lot easier.		* [[File:Multitool.gif]] Multitool - For pulsing wires; not necessary for most hacking, but makes life a lot easier.
	* [[File:Crowbar.png]] Crowbar - For prying the door open once you've hacked it.		* [[File:Crowbar.png]] Crowbar - For prying the door open once you've hacked it.

Строка 16:		Строка 16:
	The hacking menu shows current status of the airlock and you can tell much about it from there. It is probably where you'll be doing the most of your hacking. Remember, cutting power to the door will stop everything else from working.		The hacking menu shows current status of the airlock and you can tell much about it from there. It is probably where you'll be doing the most of your hacking. Remember, cutting power to the door will stop everything else from working.

	=== [[File:Multitool.~~png~~]] With a Multitool ===		=== [[File:Multitool.gif]] With a Multitool ===
	==== Finding the Right Wires ====		==== Finding the Right Wires ====
	Remember, wires are randomized, so you need to identify them the first time. The most important ones to identify are the "test light" wire and the "door bolts" wire.		Remember, wires are randomized, so you need to identify them the first time. The most important ones to identify are the "test light" wire and the "door bolts" wire.
Строка 22:		Строка 22:
	# Remember to equip [[File:Yellowgloves.png]] insulated gloves to prevent electric shock.		# Remember to equip [[File:Yellowgloves.png]] insulated gloves to prevent electric shock.
	# [[File:Screwdriver tool.png]] Screwdriver in hand, click on the airlock to open the panel and expose the wiring		# [[File:Screwdriver tool.png]] Screwdriver in hand, click on the airlock to open the panel and expose the wiring
	# With a [[File:Multitool.~~png~~]] multitool, click on the airlock to access the wiring.		# With a [[File:Multitool.gif]] multitool, click on the airlock to access the wiring.
	# Click each "Pulse" link to pulse the wires, and keep an eye on "The door bolts" and "The test light" at the bottom of the menu (two wires will cause this - pick either one). When you see either the "The test light is off!" or "The door bolts have fallen!", remember the colors of both wires.		# Click each "Pulse" link to pulse the wires, and keep an eye on "The door bolts" and "The test light" at the bottom of the menu (two wires will cause this - pick either one). When you see either the "The test light is off!" or "The door bolts have fallen!", remember the colors of both wires.
	# To put the door back to normal, the test light will need to be on first. It will come back on by itself after 10 seconds. Then, re-pulse the door bolts wire to put them "up" again, and close the wiring panel with your screwdriver.		# To put the door back to normal, the test light will need to be on first. It will come back on by itself after 10 seconds. Then, re-pulse the door bolts wire to put them "up" again, and close the wiring panel with your screwdriver.
Строка 28:		Строка 28:
	==== Airlock Hack ====		==== Airlock Hack ====
	If you have a multitool, getting through doors gets a lot easier and faster.		If you have a multitool, getting through doors gets a lot easier and faster.
	# Have the [[File:Multitool.~~png~~]] multiool in one hand and a [[File:Crowbar.png]] crowbar in another for quick switching. You'll only have 10 seconds (but you can retry if you fail).		# Have the [[File:Multitool.gif]] multiool in one hand and a [[File:Crowbar.png]] crowbar in another for quick switching. You'll only have 10 seconds (but you can retry if you fail).
	# Pulse the '''Test light''' wire, then quickly switch to your crowbar and click on the door to pry it open while the power is off.		# Pulse the '''Test light''' wire, then quickly switch to your crowbar and click on the door to pry it open while the power is off.
	#* ''Note: The door will close after power comes back up. If you want to keep it open, pulse the bolt wire to bolt the door and prevent it from shutting, then use the screwdriver to close the wiring panel.''		#* ''Note: The door will close after power comes back up. If you want to keep it open, pulse the bolt wire to bolt the door and prevent it from shutting, then use the screwdriver to close the wiring panel.''
Строка 77:		Строка 77:
	* '''Hacking without gloves'''. First find two wires of importance. The bolts wire, and the test light wire. Pulse a random door to find out the wires. If you hear sparks, see your health going down or see the message "You feel a powerful shock coursing through your body!", close that hacking window and move onto another door. Once you got the main power wire, head to an unbolted door, pulse the wire, crowbar it open. You get a larger window of time to crowbar, and you can do it without gloves.		* '''Hacking without gloves'''. First find two wires of importance. The bolts wire, and the test light wire. Pulse a random door to find out the wires. If you hear sparks, see your health going down or see the message "You feel a powerful shock coursing through your body!", close that hacking window and move onto another door. Once you got the main power wire, head to an unbolted door, pulse the wire, crowbar it open. You get a larger window of time to crowbar, and you can do it without gloves.

	== [[File:~~APC~~.png]] APCs ==		== [[File:Apc.png]] APCs ==
	Used to control power to a certain room. All APC breakers can be accessed via Power Monitoring Computers regardless of the lock status, and can be remotely controlled from there.		Used to control power to a certain room. All APC breakers can be accessed via Power Monitoring Computers regardless of the lock status, and can be remotely controlled from there.
	# [[File:Screwdriver tool.png]] Screwdriver in hand, click on APC to open the panel and expose the wiring.		# [[File:Screwdriver tool.png]] Screwdriver in hand, click on APC to open the panel and expose the wiring.
	# Equip a [[File:Multitool.~~png~~]] multitool.		# Equip a [[File:Multitool.gif]] multitool.
	# Put [[File:Wirecutters.png]] wirecutters in your other hand to quickly '''Cut''' and '''Mend''' a wire if you short out the power accidentally (which will likely happen).		# Put [[File:Wirecutters.png]] wirecutters in your other hand to quickly '''Cut''' and '''Mend''' a wire if you short out the power accidentally (which will likely happen).
	#* '''Power wires (2)''': ''Pulse'' will short out the APC. You must ''cut and mend'' the wire to restore power. Not repairing the short will render the main breaker moot, even if accessed remotely.		#* '''Power wires (2)''': ''Pulse'' will short out the APC. You must ''cut and mend'' the wire to restore power. Not repairing the short will render the main breaker moot, even if accessed remotely.
Строка 87:		Строка 87:
	# Use a screwdriver to close the wiring panel back up.		# Use a screwdriver to close the wiring panel back up.

	== [[File:~~AirAlarm~~.~~png~~]] Atmospheric Alarms ==		== [[File:Airalarm.gif]] Atmospheric Alarms ==
	Used to monitor environmental factors in a room, such as temperature, pressure, toxins, etc.		Used to monitor environmental factors in a room, such as temperature, pressure, toxins, etc.
	# [[File:Screwdriver tool.png]] Screwdriver in hand, click on Air Alarms to open the panel and expose the wiring.		# [[File:Screwdriver tool.png]] Screwdriver in hand, click on Air Alarms to open the panel and expose the wiring.
	# Equip a [[File:Multitool.~~png~~]] multitool and[[File:Wirecutters.png]] wirecutters.		# Equip a [[File:Multitool.gif]] multitool and[[File:Wirecutters.png]] wirecutters.
	#* '''Id Scan''': ''Pulsing'' will unlock the alarm for 30 seconds. ''Cutting'' will not allow people to access the alarm even if they have the correct ID. ''Mending'' will allow normal operation.		#* '''Id Scan''': ''Pulsing'' will unlock the alarm for 30 seconds. ''Cutting'' will not allow people to access the alarm even if they have the correct ID. ''Mending'' will allow normal operation.
	#* '''Alarm''': ''Cutting'' will cause an atmos alert in the area, and most likely alert the AI as well. ''Pulsing'' will reset the alarm status. ''Mending'' allows the alarm to work again.		#* '''Alarm''': ''Cutting'' will cause an atmos alert in the area, and most likely alert the AI as well. ''Pulsing'' will reset the alarm status. ''Mending'' allows the alarm to work again.
Строка 141:		Строка 141:
	\|}		\|}

	== [[File:~~Security_Camera~~.gif]] Cameras ==		== [[File:AI_Camera.gif]] Cameras ==
	Used to view rooms from, they also have upgrades which allow them to see through walls, be invincible against EMPs and have a motion detection system.		Used to view rooms from, they also have upgrades which allow them to see through walls, be invincible against EMPs and have a motion detection system.
	# With a screwdriver in hand, click on the camera.		# With a screwdriver in hand, click on the camera.
Строка 187:		Строка 187:

	#Swipe your ID on the Hardsuit to unlock the panel, then use a [[file:crowbar.png]] to open it. (An emag might come in handy.)		#Swipe your ID on the Hardsuit to unlock the panel, then use a [[file:crowbar.png]] to open it. (An emag might come in handy.)
	# Equip a [[File:Multitool.~~png~~]] multitool and[[File:Wirecutters.png]] wirecutters.		# Equip a [[File:Multitool.gif]] multitool and[[File:Wirecutters.png]] wirecutters.
	#* ''' Security Wire''': Can be cut to disable Security Checks on the suit. The suit will twitch when this wire is pulsed.		#* ''' Security Wire''': Can be cut to disable Security Checks on the suit. The suit will twitch when this wire is pulsed.
	#* ''' AI Override''': Can be pulsed to toggle whether the AI can control the suit. A red light will flicker when this wire is pulsed.		#* ''' AI Override''': Can be pulsed to toggle whether the AI can control the suit. A red light will flicker when this wire is pulsed.
Строка 198:		Строка 198:
	I haven't a clue why you'd ever want to hack any of these things, but you can!		I haven't a clue why you'd ever want to hack any of these things, but you can!

	=== [[File:~~FireAlarm~~.~~png‎~~]] Fire Alarms ===		=== [[File:Fire_alarm.gif]] Fire Alarms ===
	Fire alarms on getting cut will not detect or activate the fire doors in the case of a fire or a breach.		Fire alarms on getting cut will not detect or activate the fire doors in the case of a fire or a breach.

	=== [[File:~~Station Bounced Radio~~.png]] Station-Bounced Radios & [[File:RemoteSignalingDevice.png]] Signalers ===		=== [[File:Walkietalkie.png]] Station-Bounced Radios & [[File:RemoteSignalingDevice.png]] Signalers ===
	# Screwdriver in hand, click on the offending radio so it can be modified or attached		# Screwdriver in hand, click on the offending radio so it can be modified or attached
	# The usual radio use panel will pop up, but now with access to the wiring. If you've closed it by accident, just click on the radio as if you were going to change the settings on it.		# The usual radio use panel will pop up, but now with access to the wiring. If you've closed it by accident, just click on the radio as if you were going to change the settings on it.