Guide to Shields

Материал из FIJTeam Project Wiki
Версия от 11:12, 3 августа 2023; >La Villa Strangiato (Updates values and pictures.)
Перейти к навигации Перейти к поиску

Шаблон:WIP

The shield room in engineering.

The shields, as the name implies, protects the SCCV Horizon from all manner of outer space hazards, such as carp, dust, meteors, and rarely, enemy fire. The shield room is located next to Engineering's break room, on deck three.

Setting It Up

Setting the shields is one of the easiest jobs that an Engineer is tasked with. It's simply a matter of knowing the values to set the SMES, capacitor, and generator to.

The shield capacitor.
The shield generator.
  1. Set the SMES in the shield room to maximum input (1,500,000 watts), and the outpit to 1,400,000 watts. This is not a hard rule, and you can lower the values a bit if you want.
  2. Using the +++ button, set the shield capacitor to 1,250,000 watts. Click Activate.
  3. Now, check out the shield generator. Set the coverage radius to 100. A coverage radius of 100 will cover all of the Horizon in a mostly-skintight blue bubble.
  4. The charge rate can be set anywhere from 3 to 5.
  5. The maximum field strength can be set from 3 to 6. Using higher values is reserved for rounds where both engines are running, and there's an immediate external danger to the Horizon.

Congrats! Shields should be spooling up. Assuming you have used a three-megawatt Supermatter setup, the shields will run mostly stable for the entire round.

Шаблон:Gameplay Guides