Guide to Construction

Материал из FIJTeam Project Wiki
Перейти к навигации Перейти к поиску

Шаблон:WIP

Basic Construction

Advanced Construction

Base Materials

Name Picture Requirement Construction Destruction
Rods Click the and choose Metal Rods Use a Файл:Welder.gif on to turn them back into
Floor tiles Click the and choose Floor Tiles Use a Файл:Welder.gif on to turn them back into
Reinforced Glass Use on N/A
Plasteel (Reinforced Metal) Produced at Mining via the Smelter there. N/A


Flooring and Support

Name Picture Requirement Construction Destruction
Lattice Use on space tiles. Use a Файл:Welder.gif to turn the back into .
Plating Use on a . Use a to remove the plating.
Steel Floor Use on a floor. Use a to rip off the floor tiles.
Wood Floor Use on a floor. Use a to remove intact wood floors.

Or Use a to rip off and break all wood floors.

Light Floor + + Файл:Cable-coil.png
  • Use a to rip off the light tiles.
  • Use to undo the wiring.
Reinforced Floor Use on a floor. Use a to disassemble the reinforced floor.

Walls and Structures

Name Picture Requirement Construction Destruction
Wall
  • Stand in the desired spot
  • Click the and choose Girder
  • Use on the resulting girder

Or

  • Use a to displace the girder
Reinforced Wall
  • Stand in the desired spot
  • Click the and choose Girder
  • Use on the resulting girder to add internal support struts
  • Use a to secure the internal support struts
  • Use Файл:Plasteel.png sheet on the reinforced girder to add reinforced plating
  • Use Файл:Plasteel.png sheet on the reinforced wall to add an external cover and finish the wall
  • Use to remove the outer grille
  • Use a to expose the external reinforced cover
  • Use a Файл:Welder.gif to weld through the external reinforced cover
  • Use a to remove the external reinforced cover
  • Use a to loosen the external support rods
  • Use a Файл:Welder.gif to weld through the external support rods
  • Use a to remove the reinforced inner cover
  • Use a to unsecure the internal support struts
  • Use to remove the internal support struts
  • Use a to disassemble the girder
Grille
  • Stand where you wish to build a grille
  • Click on the to create a grille
  • Use to cut through the grille

Or

  • Use blunt objects, sharp objects or welding until it breaks

False Walls

Note : False walls cannot be built between rooms with a high pressure differential (Approximately 10 kPa differential, atmospheric pressure being 101.325 kPa)

Name Picture Requirement Construction Destruction
False Wall
  • Stand in the desired spot
  • Click the and choose Girder
  • Use a on the girder to dislodge it
  • Use on the girders
  • Use a to bolt the wall back into place
  • Use a Файл:Welder.gif to remove the wall's plating
  • Use a to disassemble the girder
Reinforced False Wall
  • Stand in the desired spot
  • Click the and choose Girder
  • Use on the resulting girder to add internal support struts
  • Use a to secure the internal support struts
  • Use a to displace the reinforced girder
  • Use Файл:Plasteel.png sheet on the displaced reinforced girder to add reinforced plating
  • Use Файл:Plasteel.png sheet on the reinforced wall to add an external cover and finish the hidden reinforced wall
  • Use a to bolt the reinforced wall back into place
  • Use to remove the outer grille
  • Use a to expose the external reinforced cover
  • Use a Файл:Welder.gif to weld through the external reinforced cover
  • Use a to remove the external reinforced cover
  • Use a to loosen the external support rods
  • Use a Файл:Welder.gif to weld through the external support rods
  • Use a to remove the reinforced inner cover
  • Use a to unsecure the internal support struts
  • Use to remove the internal support struts
  • Use a to disassemble the girder

Windows

Name Picture Requirement Construction Destruction
One Direction
  • Click the pane
  • Choose One Direction while facing desired direction
  • Right-click and rotate if facing wrong direction
  • Use a to fasten it down

Or

  • Click a with
  • Right-click and rotate if facing wrong direction
  • Use a to fasten it down

Or

  • Use blunt objects, sharp objects or welding until it breaks
Full
  • Click the pane
  • Choose Full Window while standing on desired location
  • Use a to fasten it down

Or

  • Use blunt objects, sharp objects or welding until it breaks

Reinforced Windows

Name Picture Requirement Construction Destruction
One Direction
  • Click the pane
  • Choose One Direction while facing desired direction
  • Right-click and rotate if facing wrong direction
  • Use a to fasten the frame down
  • Use a to pop the pane into the frame
  • Use a to secure the pane to the frame

Or

  • Click a with
  • Right-click and rotate if facing wrong direction
  • Use a to fasten the frame down
  • Use a to pop the pane into the frame
  • Use a to secure the pane to the frame
  • Use a to unsecure the pane from its frame
  • Use a to pop the pane out of its frame
  • Use a to unfasten the frame
  • Use a Файл:Welder.gif to cut the window back into sheets

Or

  • Use blunt objects, sharp objects or welding until it breaks
Full
  • Click the pane
  • Choose Full Window while standing on desired location
  • Use a to fasten the frame down
  • Use a to pop the pane into the frame
  • Use a to secure the pane to the frame
  • Use a to unsecure the pane from its frame
  • Use a to pop the pane out of its frame
  • Use a to unfasten the frame
  • Use a Файл:Welder.gif to cut the window back into sheets

Or

  • Use blunt objects, sharp objects or welding until it breaks
Windoor
  • Open the Windoor
  • Use a to remove the airlock electronics
  • Use to remove the wiring
  • Use a to unsecure the assembly
  • Use a Файл:Welder.gif to recover the glass

Or

  • Use blunt objects, sharp objects or welding until it breaks

Furniture

Name Picture Requirement Construction Destruction
Chairs and Stools
  • or
  • Click the or and choose Chair, Office Chair, Stool or Fancy Chair while standing in the desired location
  • Use a to disassemble the chair or stool and turn it back into
Table
  • or
  • Click the or and choose Table Parts
  • Assemble the table parts or wooden table parts while standing in the desired location
  • Use a to disassemble the table frame and turn it back into table parts
  • Use a to disassemble the table parts and turn them back into
Reinforced Table
  • table parts
  • Use on the table parts to obtain reinforced table parts
  • Assemble the reinforced table parts while standing in the desired location
  • Use a Файл:Welder.gif to weaken the reinforced table frame
  • Use a to disassemble the reinforced table frame and turn it back into reinforced table parts
  • Use a Файл:Welder.gif to remove the reinforced frame from the reinforced table parts
  • Use a to disassemble the table parts and turn them back into
Glass Table
  • table parts
  • Use on the table parts to obtain glass table parts
  • Assemble the glass table parts while standing in the desired location
  • Use a to disassemble the glass table and turn it back into glass table parts
  • Use a to disassemble the glass table parts and turn them back into and
Bookcase
  • Click the and choose Bookcase
  • Use a to anchor the bookshelf down
  • Add to make a shelf
  • Use a to remove the shelves
  • Use a to unsecure the bookshelf frame
  • Use a to break the bookshelf frame apart

Machinery and Electronics

Name Picture Requirement Construction Destruction
Newscaster Файл:Newscaster.png Файл:Newscaster frame.png
  • Insert the frame into the wall

If broken :

  • Use a to remove the broken glass (check this one)
  • Use a to disconnect it
  • Use a to remove the newscaster

If NOT broken:

  • Use a to disconnect it
  • Use a to remove the newscaster
APC APC.png

New APCs start locked with the cover engaged and the main breaker turned off

APCs may only be placed in areas which have been defined as a Station Area using the Chief Engineer's Station Blueprints

If broken :

  • Use a or heavy objects to remove the broken cover
  • Remove the Файл:Standardpowercell.png
  • Use a to clear out the broken electronics
  • Remove the floor under the APC and use on the APC to cut the terminal.
  • Use a Файл:Welder.gif to clear off the broken frame

If NOT broken:

}}

Шаблон:Construct

Шаблон:Construct

Шаблон:Construct

Шаблон:Construct

Шаблон:Construct Шаблон:Construct Шаблон:Construct Шаблон:Construct Шаблон:Construct Шаблон:Construct Шаблон:Construct Шаблон:Construct Шаблон:Construct Шаблон:Construct

Шаблон:Construct

Шаблон:Construct Шаблон:ConstructTableEnd

Miscellaneous

Disposal Machinery

Requires
Screwdriver-tool, Welder, Wrench

If Disposal Bin, turn off the pump Screwdriver to remove power connection Welder on machine to remove its joints Wrench to detach it from the plating

Machine

Requires
Screwdriver-tool, Crowbar, Wirecutters, Wrench

Screwdriver to open the cover. Crowbar to pry out the circuit. Wirecutters to remove the wires. Wrench to disassemble the frame. Usually returns all or most components used in construction. Some components may become broken.

Recharge Station

Requires
Screwdriver-tool, Crowbar, Wirecutters, Wrench, Authorized ID

Unlock the charger with an ID Screwdriver to open the cover. Wrench to dislodge the internal plating. Wirecutters to remove the wires. Crowbar to remove the components. Usually returns all or most components used in construction. Some components may become broken. Шаблон:Gameplay Guides

Источник — https://wiki.fijteam.ru/index.php?title=Guide_to_Construction&oldid=4765